Everbuild Stick 2 Adhesive Thinner and Cleaner is a highly aggressive solvent, specially blended for both thinning all purpose contact adhesive and for cleaning up excess adhesive after application. Working on either wet or dry adhesive Stick 2 Adhesive Thinner and Cleaner can also be used for diluting contact adhesives for priming purposes and degreasing surfaces prior to application of contact adhesives. To use Everbuild Contact Adhesive Thinner and Cleaner as a thinner, for priming purposes on heavily porous surfaces (e.g. MDF). Simply dilute 1 part contact adhesive to 6 parts thinners, then brush on surface and allow to dry. As a cleaner, wear protective gloves and apply to a dirty rag then rub off unwanted adhesive or soak tools in this solution as required for cleaning grease, dirt etc. CAUTION; This product is very aggressive and may damage surrounding surfaces. Always test a small inconspicuous area before use for compatibility.